10 Best Compact Camera Counterweights for Balanced Gimbal Rigs in 2026

The right counterweight can make a compact camera rig easier to balance, smoother to operate, and less demanding on its motors. However, compatibility, weight increments, mounting style, and available clearance matter as much as the stated gram or pound rating.

We’ve gathered 10 compact camera counterweights spanning removable gimbal weights, fine-tuning sets, 15mm rod accessories, and stabilizer balance kits. Use the guide below to narrow your options by rig type, payload, and adjustment needs.

Best 10 Compact Camera Counterweights Picks for 2026

Best Gimbal Counterweight – SMALLRIG 200g Removable Weight

For creators balancing a camera on a compatible gimbal, this 200g stainless-steel SMALLRIG is a straightforward compact camera counterweight. Its stackable 1/4-20 design lets you add matching weights when a single piece is not enough.

Best For: DJI Ronin-S, Ronin-SC, RS 2, RSC 2, and Zhiyun gimbal users who need a durable 200g balancing weight.

Pros:

• 200g weight for fine-tuning gimbal balance.
• Stackable 1/4-20 screw-and-threaded-hole design.
• Stainless-steel construction resists corrosion.
• Textured surface helps increase friction during installation.

Cons:

• Compatible mounting plate is sold separately.
• Additional weights may be needed for different camera setups.

This is a useful modular option when you already have, or plan to add, a compatible mounting plate. SMALLRIG also offers 100g and 50g versions for more precise adjustment.

Best Crane Fine-Tuning Set – ProAm USA 1-Inch Counterweights

Camera crane and jib operators who want incremental balance adjustments may prefer this six-piece ProAm USA set. These compact camera counterweights use a 1-inch interior diameter and weigh 1/4 pound each.

Best For: Camera cranes and jibs that accept 1-inch-diameter counterweight plates.

Pros:

• Six weights provide multiple adjustment options.
• Each plate weighs 1/4 pound for fine tuning.
• 1-inch interior diameter is specified for compatible crane and jib setups.
• Includes a one-year limited warranty.

Cons:

• Designed for cranes and jibs rather than gimbal stabilizers.
• Compatibility depends on a 1-inch counterweight shaft or mounting point.

Because the set uses several relatively light plates, it is suited to balancing gradually rather than adding one large load. Confirm your crane or jib accepts the stated 1-inch interior diameter before buying.

Best Gimbal Kit – SMALLRIG 3125 Counterweight Set

This SMALLRIG kit combines a mounting clamp with two 100g weights, making it a practical compact camera counterweight solution for long-lens gimbal setups. Multiple bottom 1/4-20 threaded holes support stacking for different balance requirements.

Best For: Users balancing long-lens cameras on DJI, Zhiyun, or Moza gimbal stabilizers listed as compatible.

Pros:

• Includes a mounting clamp and two 100g counterweights.
• Designed to mount weights behind the camera.
• Multiple threaded holes allow stackable configurations.
• Compact aluminum-alloy and stainless-steel construction is convenient to store.

Cons:

• Compatibility is focused on listed gimbal systems and camera plates.
• The supplied setup provides 200g total across two weights, so heavier rigs may need more.

With the clamp included, this is a more complete starting point than a standalone weight. Its broad listed compatibility and modular mounting options make it useful for changing long-lens configurations.

Best Lightweight Adjustment – DGZZI 25g Stabilizer Weights

When a gimbal needs only a small correction, this two-piece DGZZI set offers lightweight compact camera counterweights. Each stainless-steel weight is 25g and uses a 1/4-20 screw-and-threaded-hole format for adding more pieces.

Best For: Camera and gimbal setups requiring small, incremental balance adjustments.

Pros:

• Two 25g weights enable fine balance changes.
• 1/4-20 screws and threaded holes support adding weights.
• Stainless-steel construction is corrosion resistant.
• Smooth glossy finish is easy to install.

Cons:

• Only 50g total is included.
• May be insufficient for heavier camera imbalance.
• Specific gimbal compatibility is not detailed beyond camera use.

This set makes the most sense when a 200g-class weight would be excessive. Its small increments can help refine balance, provided your stabilizer accepts the 1/4-20 connection.

Best Compact Gimbal Counterweight – Tilta 220g Counterweight

Tilta Counterweight - for DJI Ronin S/Ronin RS 2 / Ronin-SC/Ronin RSC 2 and Zhiyun Gimbal Stabilizers (220g)

Check Price On Amazon

The Tilta 220g is a compact camera counterweight for balancing compatible gimbal setups. Its universal 1/4″-20 thread supports flexible mounting, and the stackable design lets you add multiple weights when a single 220g unit is not enough.

Best For: Gimbal users who need a compact, stackable counterweight for DJI Ronin, Zhiyun, or other 1/4″-20-compatible systems.

Pros:

• 220g aluminum-alloy construction provides a dedicated balancing option without a bulky form factor.
• 1/4″-20 threading connects to compatible gimbals, adapters, and support systems.
• Stackable design allows weight to be adjusted for different camera configurations.
• Listed compatibility includes DJI Ronin and Zhiyun gimbal stabilizers.

Cons:

• Only one 220g counterweight is included.
• It is not water resistant.
• Compatibility depends on a setup with a matching 1/4″-20 connection.

This Tilta option is a straightforward choice when your rig needs a small, secure balance adjustment rather than a larger rod-mounted weight system. Its stackable thread is especially useful as your setup changes.

Check Price On Amazon

Best Heavy-Duty Rod Set – Acouto 15mm Counterweights

Acouto Universal Aluminum Alloy Camera Counterweight Set for 15mm Rods - 2x2.2lbs Lightweight Shoulder Mount Rig Accessory

Check Price On Amazon

The Acouto set is a substantial camera counterweight solution for shoulder rigs and 15mm rod systems. It includes two 2.2-pound blocks, allowing you to configure the rear weight for larger camera builds while helping redistribute load during longer shoots.

Best For: Shoulder-mount and 15mm rod users who need two configurable, high-capacity counterweight blocks.

Pros:

• Includes two 2.2-pound (1kg) counterweight blocks for flexible rig balancing.
• Designed for 15mm rods and listed as compatible with most shoulder-mount rigs.
• CNC-processed aviation aluminum alloy construction is intended for durability.
• Weight redistribution can help reduce strain on the shoulders and arms.

Cons:

• The 2.14kg total item weight is considerably less portable than compact single weights.
• It is not water resistant.
• Its rod-based design is not intended for simple 1/4″-20 gimbal mounting.

Among these compact camera counterweights, the Acouto set is the most substantial option. Choose it when your priority is rear-weight capacity and shoulder-rig stability, rather than minimal size.

Check Price On Amazon

Best Adjustable Gimbal Kit – NEEWER GA001 Counterweights

NEEWER GA001 Gimbal Counterweights and Clamp Kit Compatible with DJI Zhiyun | Compatible with Ronin RS4Pro RS4 RS3 Pro RS3 RS2 RSC2 Crane 2S 3S Weebill S Moza Air 2 AirCross 2 for Balancing Long Lenses

Check Price On Amazon

The NEEWER GA001 combines a mounting clamp with two 100g weights, making it a practical camera counterweight kit for gimbals. Multiple 1/4″ threaded holes provide mounting-position flexibility, while bottom sockets allow the weights to be stacked for fine-tuning balance.

Best For: Gimbal users who want tool-free clamp mounting and lighter, position-adjustable counterweights for long-lens setups.

Pros:

• Includes two 100g counterweights and one mounting clamp.
• Clamp uses a knurled locking knob for tool-free installation.
• Multiple 1/4″ holes offer flexible counterweight positioning.
• Listed compatibility covers several DJI, Zhiyun, and Moza gimbal models.

Cons:

• The included weights total only 200g, so larger rigs may need more capacity.
• Maximum weight recommendation is listed as 100g, which may limit some configurations.
• It is not water resistant.

The GA001 is a useful middle ground for compact gimbal balancing: lighter and more adjustable than a heavy rod system, with more mounting flexibility than a single fixed weight. Confirm your gimbal model and required load before buying.

Check Price On Amazon

Flexible Gimbal Balance – Removable 3-Weight Counterweight Set

For shoppers comparing compact camera counterweights, this Serounder set offers a flexible way to correct an unbalanced gimbal angle. It includes three detachable weights and a clamp, so you can use the weights together or individually.

Best For: Gimbal users who want adjustable balancing for compatible DJI OSMO and other stabilizers.

Pros:

• Includes three weights and a mounting clip.
• Detachable design supports single-weight or combined use.
• Rubber-lined clip helps reduce scratching and slipping.
• Designed to help correct an unbalanced shooting angle.

Cons:

• Maximum listed weight recommendation is 86 g.
• It is not water resistant.

This is a practical choice when you need incremental adjustment rather than one fixed counterweight. Confirm your gimbal’s compatibility and required balance before buying.

Heavy-Duty Stabilizer Balance – NICEYRIG 200g Gimbal Counterweight

This NICEYRIG model is a substantial option among compact camera counterweights, providing a 200g stainless-steel cylindrical weight for camera-stabilizer balancing. Its threaded design supports mounting through compatible clamps or camera cages.

Best For: Users who need a single, heavy counterweight for compatible DJI, Zhiyun, or threaded camera-rig setups.

Pros:

• Provides a built-in 200g counterweight.
• Uses 1/4-20 threaded mounting points.
• Supports stacking of counterweight modules through its standard interface.
• Made from stainless steel 303 with a smooth surface.

Cons:

• It is a single fixed 200g unit rather than a multi-weight pack.
• Compatibility depends on having suitable threaded mounting hardware.

Choose this model when your setup needs more concentrated weight and a secure threaded connection. Its 200g format may be excessive for lighter camera-and-gimbal combinations, so check the stabilizer’s balance requirements first.

Modular Camera Balance – NICEYRIG 50g x 2 Counterweight Set

For compact camera counterweights that allow moderate adjustment, this NICEYRIG set supplies two 50g stainless-steel pieces for a combined 100g. Built-in 1/4-inch threads let you add the appropriate amount for a heavy-sided camera on a compatible gimbal.

Best For: Gimbal users balancing heavier-sided cameras such as BMPCC 4K or 6K setups on supported stabilizers.

Pros:

• Includes two 50g weights for a total of 100g.
• Allows adjustment by adding the needed quantity.
• Built-in 1/4-inch screw and threaded hole support mounting.
• Stainless-steel construction offers corrosion resistance.

Cons:

• Designed for specific compatible gimbal and mounting setups.
• The supplied notes list a 50g maximum weight recommendation.

This set strikes a middle ground between a light accessory and a single 200g counterweight. Verify the mounting arrangement and the balance requirements of your camera before relying on the full 100g set.

How We Picked These Compact Camera Counterweights

We focused on products that address common balancing problems in compact camera setups, including gimbals, cranes, jibs, shoulder rigs, and stabilizers. Selection criteria included stated weight, adjustability, mounting method, compatibility with popular platforms, portability, and whether the design supports repeatable fine-tuning.

Because camera rigs vary widely, compatibility claims should be treated as a starting point rather than a guarantee. Check your exact gimbal model, cage, lens, plate, rod diameter, and available mounting space before ordering.

Quick Comparison

Type	Best suited to	Main advantage
Removable single weights	Gimbals needing extra balance	Simple, fast installation
Fine-tuning sets	Cranes, jibs, and precise balancing	Incremental adjustment
Clamp-based kits	Multi-brand gimbal setups	Flexible positioning
15mm rod weights	Shoulder and cinema-style rigs	High capacity and secure mounting
Small stabilizer weights	Minor corrections	Lightweight micro-adjustment

Key Buying Factors for Compact Camera Counterweights

Weight and Adjustment Range

Choose the lightest solution that corrects your balance issue without overloading the gimbal or creating unnecessary inertia. A single 200g or 220g weight may work for a consistent setup, while multi-piece kits are better when you regularly change lenses, batteries, or accessories.

Mounting Compatibility

Confirm whether the counterweight attaches through a dedicated gimbal mount, clamp, screw, or 15mm rod. A product listed as compatible with a camera stabilizer may still require a specific cage, plate, adapter, or mounting hole.

Clearance and Placement

Make sure the weight will not interfere with motor arms, the camera body, lens movement, follow-focus hardware, or the gimbal’s folding mechanism. Placement affects leverage, so a smaller weight positioned farther from the balance point can have a greater effect than its size suggests.

Build Quality and Portability

Metal construction generally provides dependable durability, but it can add bulk and increase the consequences of a loose mount. Look for secure fasteners, protective surfaces where appropriate, and a compact format that fits your transport case.

Who Should Buy Which Compact Camera Counterweights?

Choose a removable 200g–220g gimbal counterweight if you use a familiar camera configuration and want a straightforward correction for a DJI Ronin, RS, or similar stabilizer.

Choose a multi-piece or fine-tuning kit if you frequently change lenses, accessories, or payloads and need smaller increments for precise balancing.

Choose a clamp-based universal kit if your equipment spans several gimbal brands or you want more freedom to adjust the mounting position.

Choose a 15mm rod counterweight for a shoulder mount or cinema-style rig that already uses rods and needs substantially more counterbalance than a small gimbal weight provides.

Choose small 23g–50g stabilizer weights when the rig is nearly balanced and only needs subtle corrections. Before filming, rebalance all three axes with the camera fully configured, then verify that every clamp and screw remains tight during movement.